Semiconductor devices are classified by the manufacturer using a unique part numbering system. There are many systems in use, but here are some popular schemes in detail
THE europeonbased pro-electron system
the American based jedec system
and the Japenese based jis system
JEDEC Numbering System
The JEDEC system, ( J oint Electron Device Engineering Council. This system has the following format:
digit, letter, serial number, [suffix]
Digit:
The first digit designates the amount of P-N junctions in the device. So a device starting with "2" would contain 2 P-N junctions and would most likely be either a transistor or a FET. Common part numbers are listed below:
1. Diodes
2. Bipolar transistors or Field Effect Transistors
3. Double Gate MOSFETS, SCR's
4. Opto Couplers
Letter:
The letter is always "N", and the remaining figures contain the device serial number.
Serial Number:
The serial number runs from 100 to 9999 and indicates nothing about the transistor.
Suffix:
If a suffix is present then this indicates the gain group as below:
A = low gain
B = medium gain
C = high gain
No suffix = ungrouped (any gain).
ex#1: bc547b is taken then it says that transistor is of medium gain and
ex#2 1N4001 would be a diode and
ex#3 3N201 would be a double gate MOSFET.
Pro-Electron Numbering System
This system uses the following format:
two letters, [letter], serial number, [suffix]
The 1st letter specifies the semiconductor material :
A Germanium
B Silicon
C Gallium Arsenide
R Compound Materials
The 2nd letter specifies the type of device :
A Diode, low power or signal
B Diode, variable capacitance
C Transistor, audio frequency low power
D Transistor, audio frequency power
E Diode, tunnel
F Transistor, high frequency low power
G Miscellaneous devices
H Diode, sensitive to magnetism
K Hall effect device
L Transistor, high frequency power
N Photocoupler
P Light detector
Q Light emitter
R Switching device, low power e.g. thyristor, diac, unijunction etc
S Transistor, low power switching
T Switching device power, e.g. thyristor, triac, etc.
U Transistor, switching power
W Surface acoustic wave device
X Diode, multiplier, e.g. varactor
Y Diode, rectifying
Z Diode, voltage reference
Third Letter:
If present this indicates that the device is intended for industrial or professional rather than commercial applications. It is usually a W,X,Y or Z. Examples- BFY51.
Serial Number:
The serial number runs from 100-9999.
Suffix:
If a suffix is present then this indicates the gain group as below:
A = low gain
B = medium gain
C = high gain
No suffix = ungrouped (any gain).
JIS System
The Japanese Industrial Standard has the following format:
digit, two letters, serial number, [suffix]
Digit:
This indicates the amount of p-n junctions as in the JEDEC code.
Letters:
The letters indicate the intended application for the device according to the following code:
SA: PNP HF transistor SB: PNP AF transistor
SC: NPN HF transistor SD: NPN AF transistor
SE: Diodes SF: Thyristors
SG: Gunn devices SH: UJT
SJ: P-channel FET/MOSFET SK: N-channel FET/MOSFET
SM: Triac SQ: LED
SR: Rectifier SS: Signal diodes
ST: Diodes SV: Varicaps
SZ: Zener diodes
Serial Number:
The serial number runs from 10-9999.
Suffix:
The (optional) suffix indicates that the type is approved for use by various Japanese organizations.
Major Manufacturers
Major manufacturers often produce their own code and numbering scheme for commercial reasons. The following abbreviations represent some of the larger semiconductor manufacturers:
MJ: Motorolla power, metal case
MJE: Motorolla power, plastic case
MPS: Motorolla low power, plastic case
MRF: Motorolla HF, VHF and microwave transistor
RCA: RCA
RCS: RCS
TIP: Texas Instruments power transistor (platic case)
TIPL: TI planar power transistor
TIS: TI small signal transistor (plastic case)
ZT: Ferranti
ZTX: Ferranti
Common examples include: TIP32A, MJE3055, ZTX302.
Tidak ada komentar:
Posting Komentar